Learning Outcomes

Electronic and Electric Maintenance Repair

Tools Needed for Troubleshooting

Electronic Components

Lesson Summary

This module covers electronic maintenance and components. You will be introduced to things you need to learn to become a troubleshooter. This section will explain the various tools you need to become a troubleshooter, as well as the passive and active electronic components.

Testing a Fuse, Bulb or Switch

Testing Transformers and Resistance

Troubleshooting

This module is about testing and troubleshooting. You will be taught how to test a fuse and a bulb. The testing of the switch will be covered. You will also be taught how to test transformers and resistance. Troubleshooting and its procedures will be covered, along with safety and maintenance concerns.

Introduction to Electric Components

Different Circuits

Measuring Currents

Understanding Resistance

In this module, you will be introduced to electric components, along with the types of current. The different circuits and the voltage measurement are explained. Explanations of laboratory experiments and practical current measurements are demonstrated. Finally, you will be taught how to measure resistance.

Introducing Resistors

Behaviour and Testing of Capacitors

Inductors and Coils

Testing Transistors

In this module, you will be introduced to resistors, along with the power dissipation and Ohm’s law. You will be taught the behaviour and testing of capacitors. You will also be taught about inductors and how to test and measure coils. The diodes will be unravelled. Finally, transistors and their basic types will be addressed.

Maintenance and Troubleshooting for Electronic and Electrical Devices - Course Assessment

With this practical, free online course, learn how to repair and maintain your electronic or electrical devices.

Maintenance and Troubleshooting for Electronic and Electrical Devices

Would you like to repair and maintain your electronic and electrical devices? This free online course will teach you what you need to know about troubleshooting. You'll learn about testing fuses, bulbs and switches and everything about electronic and electrical maintenance. Troubleshooting procedures will be covered, along with practical explanations. In addition to this, the course will disclose the use of capacitors, inductors and transistors.

You use many electronic and electrical devices in your home daily. What will you do if these devices break down? You might want to resort to troubleshooting your electronic equipment. In this course, you will learn about troubleshooting, which is a form of problem-solving. As you endeavour to repair failed products or processes on a machine or a system, you are troubleshooting. This course will teach you how to complete a logical and systematic search for the source of a problem to solve it, making the electronic and electrical devices operational again. Starting with the information you need to become a good troubleshooter, you will also learn basic electrical and electronic components and circuit analysis. The course will address repair and maintenance procedures in the context of troubleshooting. We will also introduce you to the basic things you will need to become a troubleshooter. These mainly include multimeters, screwdrivers and wiring tools. Other tools are referred to as miscellaneous or “do-it-yourself” tools.
As you work through the course, you will learn that troubleshooting is one of the features on which depend the effective and efficient working conditions of devices. Other features include maintenance, servicing and repairing. Maintenance is the process that includes hardware and software. Associated with the hardware part of the equipment, servicing consists of four main steps that will be fully disclosed. We will cover how to uninstall all the physical components, starting with the power connection. Once we have done this, we will explain how to clean dust from all the components. You will learn how to perform a visual or electronic check as required. The last step is about reinstalling all components carefully and adequately. Following on the servicing is the troubleshooting, which consists of detecting and rectifying faults in the equipment. After correcting the problem in the hardware or software, the course will give more of an explanation of the troubleshooting-related features.
Finally, you will learn about the current flow of electrons, voltage and resistance, and measurement. We will introduce you to resistors and their parameters. Following the resistors, the course will highlight the behaviour and testing of capacitors. Having been acquainted with inductors, you will be taught how to test and measure coils along with the various diodes. This course will also cover transistors with some emphasis on switches and amplifiers. Practical testing of transistors will be addressed, allowing you to have a good knowledge of troubleshooting. This comprehensive course about troubleshooting will equip you with valuable knowledge, enabling you to repair your electronic and electrical devices. Troubleshooting professionals will find this course very useful to improve their knowledge and help them be far more efficient.

CreativeLive is Live Again: CourseHorse Acquires Platform 15 Days Before Shutdown

Harvard Launches Two New Free Certificate Courses

8 Best Ecology Courses for 2025: How Species and Systems Interact

Harvard CS50 in 2025: How to Get a Free Certificate

Four Months After Unveiling Ambitious AI Roadmap, Udemy’s Co-founder CTO is Out

Udemy Appoints McKinsey Veteran as CEO Amid Growth Challenges

freeCodeCamp’s Responsive Web Design (Free) Certification Is Out of Beta

FutureLearn’s 2021: Year in Review

Unlock 800+ Free Certificates: Master Tech & Soft Skills with CodeSignal Learn

Best CSS Layout Courses for 2025

10 Best Go (Golang) Courses for 2025

7 Best TikTok Marketing Courses for 2025

200+ Cursos Online da FGV com Certificado Gratuito

6 Best Penetration Testing Courses in 2025

DeepLearning.AI to Cross $100M in Sales on Coursera

6 Best Influencer Marketing Courses for Marketers

Aims & Objectives of ISO/IEC 17025:2017

Accrediting to ISO/IEC 17025:2017

Main Sections of ISO/IEC 17025:2017

This module presents the fundamental aspects of ISO/IEC 17025:2017 along with its aims and objectives. The module also explains different forms of standardized verbs used throughout the standard. Moreover, you will also learn the benefits of accrediting to ISO/IEC 17025. Lastly, an overview of the section's standard is also given.

General and Structural Guidelines for Laboratories

Resource Requirements for Testing Laboratories

Contracts, Validation, Sampling & Handling

Technical Records, Uncertainty, Results Validity, & Reports

In this module, you will encounter the essential requirements given in clauses 4, 5, 6, and 7 of ISO/IEC 17025;2017. However, the explanation of Clause 7 is provided till sub-clause - 7.8. Through this module, you will learn about the general, structural, resource, and process requirements of ISO/IEC 17025:2017.

Information Management, Complaints & Nonconformities (NCs)

Management System Requirements

Taking Corrective Actions

In this module, you will see discussions on ISO/IEC 17025:2017 beginning from sub clause 7.9 that puts forward the complaint requirements put forth by the standard. Furthermore, it presents the standard's requirements regarding management systems. Moreover, it also contains necessary measures to be taken for corrective actions.

ISO/IEC 17025:2017 - Laboratory Management System- Course Assessment

Learn about laboratory management systems laid out by the ISO 17025 international standard in this free online course.

ISO/IEC 17025:2017 - Laboratory Management Systems

This short course is designed for individuals and laboratories looking forward to their standardisation. We explain management standards defined by the ‘ISO/IEC 17025 general requirements for testing and calibration laboratories competence’ devised by ISO. This comprehensive course explains all the basic and essential requirements of the standard. It also provides a simplified clause-by-clause explanation of its four main sections.

Fundamentals of Pest Control

Pest Identification and Assessment

Non-Chemical Pest Control Methods

Chemical Pest Control Methods

This module will teach you the fundamentals of pest control, types of pests and their impact, pest life cycles and behavior, factors influencing pest infestations, pest identification and assessment, non-chemical pest control methods, genetic control and sterile insect, chemical pest control methods, and integrated pest management (IPM) approach.

Monitoring and Prevention

Sustainable Pest Management

Urban and Structural Pest Control

Topics you will learn in this module include but are not limited to pest monitoring techniques, preventive measures and exclusion strategies, ecological impact of pesticides, selective pesticide use and resistance management, organic and biodynamic pest management, pest management in residential areas, and commercial and industrial pest control.

Pest Control and Management - Assessment

This free online course teaches you how to use chemical and non-chemical pest control techniques to manage infestations.

Pest Control and Management

Pests make environments unhygienic and are a major cause of diseases, some of which may be lethal and difficult or expensive to cure. Effective pest management and control are necessary to keep a living and working environment free from health hazards. This course provides the knowledge and skills required to establish and maintain a successful pest control management programme and describes various pests, their life cycles and their behaviour.

Foundations of Construction Safety Management

Safety Management for Hazardous Environments

High-risk Site Activities and Demolition Safety

This module covers risk identification and mitigation in construction work and how to evaluate and manage risk in compliance with CDM regulations. You'll also learn how behaviour affects safety on construction sites, including safety measures for scaffolding, excavation, demolition and more.

Course Assessment - Site Management Safety Training Scheme (SMSTS)

Learn how to manage safety on construction sites in accordance with UK legal provisions in this free online course.

Site Management Safety Training Scheme (SMSTS)

Construction workers are often vulnerable to injuries and hazards so ensuring safety is maintained consistently is crucial for both site managers and workers. This course covers the essential knowledge needed for maintaining safety on construction sites. You'll learn to identify and assess risks while adhering to UK industry regulations. In addition, we'll discuss safety measures to take during erecting scaffolding, excavations and demolitions.

Introduction to Hot Work

Classification of Hot Work Areas

Roles and Responsibilities

Hot Work Permit

Hot Work Risk Assessment

Essential Safety Precautions

This module will familiarize you with hot work processes, including their potential hazards and safety precautions. You'll learn how to assess the risks associated with hot work and determine appropriate control measures. You'll also understand the hot work permit system and the roles & responsibilities of those involved in the permitting process.

Hot Work Safety - Course Assessment

Learn how to manage the hazards associated with hot work processes in this free online health and safety course.

Hot Work Safety

This hot work safety training equips you with the essential knowledge to recognize and mitigate hot work hazards. You'll understand the hot work risk assessment process and hierarchy of controls for effectively reducing risks. The course explains the hot work permit system along with the roles and responsibilities of those involved in the permitting process. You'll also gain a clear understanding of hot work permitted and prohibited areas.

Introduction to Traffic Marshalling

Traffic Management

Temporary Traffic Control

Traffic Risk Assessment

Vehicle Signaling

Reversing Vehicles

Health and Safety

In this module, we will look at the fundamental objectives of traffic marshalling and the general duties of a traffic marshal. A traffic marshal's responsibilities when controlling traffic on a highway or construction areas shall be examined. Assessing risks along with health and safety concerns of traffic near construction areas will be assessed.

Construction Safety: Traffic Marshalling - Course assessment

Train as a traffic marshal or bankman who provides traffic management on construction sites in this free online course.

Construction Safety: Traffic Marshalling

This course takes an in-depth look at the role of traffic marshals on construction sites. Traffic management is important to maintaining health and safety as the presence of heavy machinery and large vehicles creates a need for the efficient direction of traffic. Traffic management in such a busy area faces hazards and safety risks, which we identify in this course. Sign up to train as a traffic marshal or bankman and add a skill to your CV.

Introduction to the AS Standards

Organization's Context and Leadership

QMS Planning and Support

This module introduces students to the AS standards for suppliers of the aviation industry. It explains the importance of regulations in the aerospace industry and navigates them through the journey of different AS standards. It also explains the requirements of Clauses 4, 5, 6, and 7 of this standard.

Organizational Operations

Operations and Evaluation

Organizational Improvement

This module explains the requirements of Clauses 8, 9, and 10 of AS9100D. These requirements are regarding organizational operations, evaluation, and continuous improvement of the organizational operations.

AS9100D Quality Management System (QMS) for Aerospace Industry - Course Assessment

Learn the requirements of AS9100D for the developers and suppliers of components for the aerospace & defense industries.

AS9100D Quality Management System (QMS) for Aerospace Industry

This course explains different clauses and their various requirements for the organizations that develop, design, or supply parts, components, and assemblies concerned with the aerospace and defense industries. After enrolling, the students will be able to navigate the differences between the different versions of the AS standards. Moreover, they will also get a simple and straightforward explanation of this standard's requirements.

Introduction to Hazardous Materials Handling - Learning Outcomes

Understanding Hazardous Materials

Legal and Regulatory Compliance

Importance of Hazard Communication

Risk Assessment and Management

Personal Protective Equipment (PPE) for Hazardous Materials Handling

Introduction to Hazardous Materials Handling - Lesson Summary

In this module, participants will have a solid foundation in understanding hazardous materials, legal and regulatory compliance, hazard communication, risk assessment, and the proper use of personal protective equipment. This knowledge is essential for creating a safe and compliant working environment in industries dealing with hazardous materials.

Hazardous Materials Storage and Transportation - Learning Outcomes

Proper Storage Practices for Hazardous Materials

Managing Segregation and Compatibility of Hazardous Materials

Emergency Preparedness for Hazardous Materials Storage

Transportation Regulations

Handling Hazardous Materials in Transit

Emergency Response Planning

Case Studies and Lessons Learned

Hazardous Materials Storage and Transportation - Lessons Summary

This module covers storing hazardous materials, segregation and compatibility, and developing emergency response plans. Learn DOT regulations, proper labelling, packaging, and security measures for transportation, best practices for loading/unloading and case studies.

Advanced Hazardous Materials Handling Techniques - Learning Outcomes

Decontamination Procedures

Confined Space Entry Protocols

Managing Hazardous Waste

Best Practices for Chemical Spill Response

Continuous Improvement in Hazardous Materials Handling

Advanced Hazardous Materials Handling Techniques - Lesson Summary

This module covers decontamination techniques to ensure health, safety, and regulatory compliance. Learn to manage decontamination zones, handle confined space hazards, and apply physical, chemical, thermal, and radiological decontamination. Develop skills in PPE selection, emergency response planning, and environmental protection.

Hazardous Materials Handling Mastery - Course Assessment

Gain expertise, ensure safety, and excel in hazardous materials handling with this comprehensive free online course.

Hazardous Materials Safety Specialist

This course covers the classification, legal compliance, and risk assessment of hazardous materials. It delves into communication standards, PPE usage, and storage guidelines. Transportation regulations and emergency response planning are also covered. Advanced techniques include decontamination, confined space entry, hazardous waste management, chemical spill response, and continuous improvement through safety audits and case studies.