Learning Outcomes

Operation of Tugboats

Rescue and Salvage Tugs

River Work

Towing Gear, Towing Safety and Record-keeping of Towing Gear

Lesson Summary

In this module, you will be introduced to the towing vessel operations, operations of the tugboats, as well as the types of tugboats operations. You will also be introduced to the harbour tugs, oceangoing river tugs, as well as the tug operations and responsibilities.

Hydraulic Oil System

Tools Use for Making Permanent Joints

Soldering Operation

In this module, you will be introduced to the hydraulic oil system, welding and cutting, as well as the tools that can be used for breaking permanent joints. You will also be introduced to gas cutting, plasma cutting, as well as tools that can be used to make permanent joints.

Introduction to Tug Operations and Safety - Course Assessment

Discover a tugboat’s operations, features and various welding and soldering processes in this free online course.

Beginner Tug Operations and Safety

This course on tug operations and safety teaches you about the operations of tugboats, the diverse types of tugboats operations and the modes of tug operations under different conditions of ship work. Study the characteristics of the harbour tugs, tractor tugs and Azimuth stern drive tugs. You will learn about fitting tugs for rescue and how and why you find them in higher concentrations near areas with noticeable heavy shipping traffic.

Tugboats manoeuvre large boats by pushing or pulling them and are the most powerful vessel for their size found in the oceans. This introductory course delves into tugs’ operations, operation types and safety. It discusses harbour tugs, ocean-going river tugs, their responsibilities and the various modes of tug operation under different conditions. The course will also introduce you to the characteristics of the harbour tugs, tractor tugs, Azimuth stern drive (ASD) tugs and how you fit tugs out for rescue. The course will also examine how you can find tugs in higher concentrations near areas with both heavy shipping traffic and hazardous weather conditions. We will explain how you can record training in the ship’s logbooks, precautions and guiding principles to assist the pilot in his decisions. You will also learn how an aft tug can be used to breast the ship's stern in place of the spring line and the critical manoeuvre steps. Investigate the towing arrangements and equipment you should confirm and how to carry out checks on the towing winch.
The course then explains the various river work scenarios and how to use the towing gear to connect a tug and tow. We describe the towline and terminal gear equipment of utility terrain vehicles (UTVs) and the components of the hydraulic oil system. Explore how to classify pumps into different groups and the important points on the oil properties. Learn about oil deterioration, oil contamination and oil filtration. We describe tugboats’ welding and cutting processes and the tools used to make permanent joints. We will work through the importance of the current setting, the length of the arc and the angle of travel of the arc welding. We will teach you about the oxy-acetylene gas welding process, the brazing process and the sequential operations that you should perform before making a soldered joint. Learn how to cut or enlarge a cylindrical hole in a solid material. We also cover the classification of the soldering flux, functions of the flux and application of the soldering iron. You will also learn about the essential safety precautions you should observe in the soldering process.
Furthermore, this course will help you become familiar with the windlass and mooring winch design and the winch operation process. Become acquainted with the typical complement of lines you find aboard tugs in ship work, the several key components of a towline system and the components of a functional and safe system. This course will teach you how the towing arrangements and equipment should conform and how to carry out the required checks on the towing winch. Discover the concept of soldering, the applications of soldering and the advantages and disadvantages of soldering. We will explain the application of heat and solder, flux application and how to shape and fit different metal parts together. This introductory course on tug operations and safety will help you improve your knowledge of a lathe, drilling and tapping processes for repairs. It will be of great interest to students, researchers and anyone curious about the various operations carried out on a tugboat. So register for this course and start your next learning experience today.

7 Best Reverse Engineering Courses for 2025

8 Best Ecology Courses for 2025: How Species and Systems Interact

Boost Your AI Confidence with Google’s Course

EdX’s 2021: Year in Review

Udemy vs Coursera: Comparing Online Learning Giants that IPO’d in 2021

Udacity’s 2021: Year in Review

Harvard Launches Two New Free Certificate Courses

12 Best Data Analysis Courses for 2025: From Data to Insights

Harvard CS50 Guide: How to Pick the Right Course (with Free Certificate)

[2025] 2000+ Free SWAYAM + NPTEL Courses

262K Courses, 833M Enrollments: Breaking Down Udemy’s Massive Catalog

CreativeLive is Live Again: CourseHorse Acquires Platform 15 Days Before Shutdown

Harvard’s Intro to Python: Earn a Free Certificate

Udemy Earns More, Pays Instructors Less: Class Central Exclusive

[2025] 470+ Hours of Free LinkedIn Learning Courses with Free Certification

2000+ Free Developer and IT Certifications

Aims & Objectives of ISO/IEC 17025:2017

Accrediting to ISO/IEC 17025:2017

Main Sections of ISO/IEC 17025:2017

This module presents the fundamental aspects of ISO/IEC 17025:2017 along with its aims and objectives. The module also explains different forms of standardized verbs used throughout the standard. Moreover, you will also learn the benefits of accrediting to ISO/IEC 17025. Lastly, an overview of the section's standard is also given.

General and Structural Guidelines for Laboratories

Resource Requirements for Testing Laboratories

Contracts, Validation, Sampling & Handling

Technical Records, Uncertainty, Results Validity, & Reports

In this module, you will encounter the essential requirements given in clauses 4, 5, 6, and 7 of ISO/IEC 17025;2017. However, the explanation of Clause 7 is provided till sub-clause - 7.8. Through this module, you will learn about the general, structural, resource, and process requirements of ISO/IEC 17025:2017.

Information Management, Complaints & Nonconformities (NCs)

Management System Requirements

Taking Corrective Actions

In this module, you will see discussions on ISO/IEC 17025:2017 beginning from sub clause 7.9 that puts forward the complaint requirements put forth by the standard. Furthermore, it presents the standard's requirements regarding management systems. Moreover, it also contains necessary measures to be taken for corrective actions.

ISO/IEC 17025:2017 - Laboratory Management System- Course Assessment

Learn about laboratory management systems laid out by the ISO 17025 international standard in this free online course.

ISO/IEC 17025:2017 - Laboratory Management Systems

This short course is designed for individuals and laboratories looking forward to their standardisation. We explain management standards defined by the ‘ISO/IEC 17025 general requirements for testing and calibration laboratories competence’ devised by ISO. This comprehensive course explains all the basic and essential requirements of the standard. It also provides a simplified clause-by-clause explanation of its four main sections.

Fundamentals of Pest Control

Pest Identification and Assessment

Non-Chemical Pest Control Methods

Chemical Pest Control Methods

This module will teach you the fundamentals of pest control, types of pests and their impact, pest life cycles and behavior, factors influencing pest infestations, pest identification and assessment, non-chemical pest control methods, genetic control and sterile insect, chemical pest control methods, and integrated pest management (IPM) approach.

Monitoring and Prevention

Sustainable Pest Management

Urban and Structural Pest Control

Topics you will learn in this module include but are not limited to pest monitoring techniques, preventive measures and exclusion strategies, ecological impact of pesticides, selective pesticide use and resistance management, organic and biodynamic pest management, pest management in residential areas, and commercial and industrial pest control.

Pest Control and Management - Assessment

This free online course teaches you how to use chemical and non-chemical pest control techniques to manage infestations.

Pest Control and Management

Pests make environments unhygienic and are a major cause of diseases, some of which may be lethal and difficult or expensive to cure. Effective pest management and control are necessary to keep a living and working environment free from health hazards. This course provides the knowledge and skills required to establish and maintain a successful pest control management programme and describes various pests, their life cycles and their behaviour.

Foundations of Construction Safety Management

Safety Management for Hazardous Environments

High-risk Site Activities and Demolition Safety

This module covers risk identification and mitigation in construction work and how to evaluate and manage risk in compliance with CDM regulations. You'll also learn how behaviour affects safety on construction sites, including safety measures for scaffolding, excavation, demolition and more.

Course Assessment - Site Management Safety Training Scheme (SMSTS)

Learn how to manage safety on construction sites in accordance with UK legal provisions in this free online course.

Site Management Safety Training Scheme (SMSTS)

Construction workers are often vulnerable to injuries and hazards so ensuring safety is maintained consistently is crucial for both site managers and workers. This course covers the essential knowledge needed for maintaining safety on construction sites. You'll learn to identify and assess risks while adhering to UK industry regulations. In addition, we'll discuss safety measures to take during erecting scaffolding, excavations and demolitions.

Introduction to Hot Work

Classification of Hot Work Areas

Roles and Responsibilities

Hot Work Permit

Hot Work Risk Assessment

Essential Safety Precautions

This module will familiarize you with hot work processes, including their potential hazards and safety precautions. You'll learn how to assess the risks associated with hot work and determine appropriate control measures. You'll also understand the hot work permit system and the roles & responsibilities of those involved in the permitting process.

Hot Work Safety - Course Assessment

Learn how to manage the hazards associated with hot work processes in this free online health and safety course.

Hot Work Safety

This hot work safety training equips you with the essential knowledge to recognize and mitigate hot work hazards. You'll understand the hot work risk assessment process and hierarchy of controls for effectively reducing risks. The course explains the hot work permit system along with the roles and responsibilities of those involved in the permitting process. You'll also gain a clear understanding of hot work permitted and prohibited areas.

Introduction to Traffic Marshalling

Traffic Management

Temporary Traffic Control

Traffic Risk Assessment

Vehicle Signaling

Reversing Vehicles

Health and Safety

In this module, we will look at the fundamental objectives of traffic marshalling and the general duties of a traffic marshal. A traffic marshal's responsibilities when controlling traffic on a highway or construction areas shall be examined. Assessing risks along with health and safety concerns of traffic near construction areas will be assessed.

Construction Safety: Traffic Marshalling - Course assessment

Train as a traffic marshal or bankman who provides traffic management on construction sites in this free online course.

Construction Safety: Traffic Marshalling

This course takes an in-depth look at the role of traffic marshals on construction sites. Traffic management is important to maintaining health and safety as the presence of heavy machinery and large vehicles creates a need for the efficient direction of traffic. Traffic management in such a busy area faces hazards and safety risks, which we identify in this course. Sign up to train as a traffic marshal or bankman and add a skill to your CV.

Introduction to the AS Standards

Organization's Context and Leadership

QMS Planning and Support

This module introduces students to the AS standards for suppliers of the aviation industry. It explains the importance of regulations in the aerospace industry and navigates them through the journey of different AS standards. It also explains the requirements of Clauses 4, 5, 6, and 7 of this standard.

Organizational Operations

Operations and Evaluation

Organizational Improvement

This module explains the requirements of Clauses 8, 9, and 10 of AS9100D. These requirements are regarding organizational operations, evaluation, and continuous improvement of the organizational operations.

AS9100D Quality Management System (QMS) for Aerospace Industry - Course Assessment

Learn the requirements of AS9100D for the developers and suppliers of components for the aerospace & defense industries.

AS9100D Quality Management System (QMS) for Aerospace Industry

This course explains different clauses and their various requirements for the organizations that develop, design, or supply parts, components, and assemblies concerned with the aerospace and defense industries. After enrolling, the students will be able to navigate the differences between the different versions of the AS standards. Moreover, they will also get a simple and straightforward explanation of this standard's requirements.

Introduction to Hazardous Materials Handling - Learning Outcomes

Understanding Hazardous Materials

Legal and Regulatory Compliance

Importance of Hazard Communication

Risk Assessment and Management

Personal Protective Equipment (PPE) for Hazardous Materials Handling

Introduction to Hazardous Materials Handling - Lesson Summary

In this module, participants will have a solid foundation in understanding hazardous materials, legal and regulatory compliance, hazard communication, risk assessment, and the proper use of personal protective equipment. This knowledge is essential for creating a safe and compliant working environment in industries dealing with hazardous materials.

Hazardous Materials Storage and Transportation - Learning Outcomes

Proper Storage Practices for Hazardous Materials

Managing Segregation and Compatibility of Hazardous Materials

Emergency Preparedness for Hazardous Materials Storage

Transportation Regulations

Handling Hazardous Materials in Transit

Emergency Response Planning

Case Studies and Lessons Learned

Hazardous Materials Storage and Transportation - Lessons Summary

This module covers storing hazardous materials, segregation and compatibility, and developing emergency response plans. Learn DOT regulations, proper labelling, packaging, and security measures for transportation, best practices for loading/unloading and case studies.

Advanced Hazardous Materials Handling Techniques - Learning Outcomes

Decontamination Procedures

Confined Space Entry Protocols

Managing Hazardous Waste

Best Practices for Chemical Spill Response

Continuous Improvement in Hazardous Materials Handling

Advanced Hazardous Materials Handling Techniques - Lesson Summary

This module covers decontamination techniques to ensure health, safety, and regulatory compliance. Learn to manage decontamination zones, handle confined space hazards, and apply physical, chemical, thermal, and radiological decontamination. Develop skills in PPE selection, emergency response planning, and environmental protection.

Hazardous Materials Handling Mastery - Course Assessment

Gain expertise, ensure safety, and excel in hazardous materials handling with this comprehensive free online course.

Hazardous Materials Safety Specialist

This course covers the classification, legal compliance, and risk assessment of hazardous materials. It delves into communication standards, PPE usage, and storage guidelines. Transportation regulations and emergency response planning are also covered. Advanced techniques include decontamination, confined space entry, hazardous waste management, chemical spill response, and continuous improvement through safety audits and case studies.